內窺鏡醫療檢測儀與內窺鏡影像工作站等儀器設備投資大，系統復雜，科技含量高，工作環境要求高，對其安裝操作使用等方面均有嚴格要求。下面德國狼牌內窺鏡設備維修人員為您講解一番。

Endoscopic medical detector and endoscopic image workstation and other instruments and equipment have large investment, complex system, high scientific and technological content, and high requirements for working environment. There are strict requirements for their installation, operation and use. Now the maintenance personnel of German Wolf brand endoscope equipment will explain it to you.

內窺鏡的使用，日常維護一般由使用科室和操作人員完成.它是一項每天都要進行的工作，應該制度化，它的內容應寫進操作規程和注意事項：使用科室應選派1名懂得一定儀器知識，責任心強的技術員擔任專職或兼職儀管員，協助和指導操作人員做好這一工作。日常維護工作的內容一般包括：

The use and daily maintenance of the endoscope are generally completed by the using department and operators It is a daily work and should be institutionalized. Its contents should be written into the operating procedures and precautions: the operating department should assign a technician who knows a certain instrument knowledge and has a strong sense of responsibility to serve as a full-time or part-time instrument controller to assist and guide the operators to do this work well. The contents of daily maintenance generally include:

⑴機房及儀器設備的保潔；觀察調整機房溫度、濕度穩定。

⑴ Cleaning of machine rooms and instruments; Observe and adjust the stability of temperature and humidity in the machine room.

⑵檢查機器的機械、轉動、氣路、水路，螺釘、螺母等部位是否正常。

(2) Check whether the machinery, rotation, air circuit, water circuit, screws, nuts and other parts of the machine are normal.

⑶檢查儀器表面的開關、旋鈕，指示燈、儀表及顯示參數是否正常。

(3) Check whether the switches, knobs, indicator lights, instruments and display parameters on the instrument surface are normal.

⑷正式工作前，利用儀器自檢程序檢測儀器各部分的狀態情況。

(4) Before formal work, use the instrument self inspection procedure to detect the status of each part of the instrument.

⑸注意儀器在運行過程中有否異常氣味和聲音，圖像質量是否正常。

(5) Pay attention to whether the instrument has abnormal smell and sound during operation, and whether the image quality is normal.

⑹檢查操作人員操作儀器是否符合規程，并及時糾正。

(6) Check whether the operators operate the instruments according to the regulations and correct them in time.

由于醫用內窺鏡是一種侵入式檢測工具，因此，使用醫用內窺鏡的都是進過嚴格培訓和考核的。

As medical endoscope is an invasive detection tool, those who use medical endoscope have received strict training and assessment.

在長期使用過程中，由于種種原因，出現故障是不可避免的。故障維修仍然是設備管理和工程技術人員的一項重要工作，您要提前做好預防措施才行，更多相關內容就來我們網站http://m.thefunfoodfactory.com咨詢吧！

In the process of long-term use, failure is inevitable due to various reasons. Fault maintenance is still an important work for equipment management and engineering technicians. You should take preventive measures in advance. More relevant information can be found on our website http://m.thefunfoodfactory.com Consult!