For endoscopes, the internal quality factors may include some chemical components, and some eye defects, which affect the quality of use, including some welding performance and operation performance. During the use of endoscopes, including the quality inspection of some casting raw materials, non-destructive testing of castings, and surface quality inspection of castings Testing, in the whole process of quality testing, can be completed in a relatively short time in all aspects of some of the material analysis.

內窺鏡在使用過程當中，常用的設備就是一些探傷或者是射線探傷的檢測等等，因?yàn)楸旧肀砻娴墓鉂嵍认鄬容^的差，所以木質也會出現比較疏松的情況，這個時候就需要格外的注意一些探傷方法的選擇，包括一些儀器的造型，還有一些操作技術和人員的經驗等等。鑄件表面的缺陷的檢查一定是沒有辦法用肉眼觀察到的，所以在使用這種內窺鏡的時候，就能夠更好的去觀察出來表面的一些缺陷，相關的檢測也會變得更加的準確，這個時候就需要快速的去找到問題，然后及時的去解決問題。

In the process of using endoscope, the commonly used equipment is some flaw detection or radiographic detection, etc. because the surface finish is relatively poor, the wood will also appear loose. At this time, we need to pay special attention to the selection of some flaw detection methods, including the modeling of some instruments, and the experience of some operation technology and personnel And so on. Casting surface defect inspection must be no way to use the naked eye to observe, so when using this endoscope, we can better observe some surface defects, and the relevant detection will become more accurate. At this time, we need to quickly find the problem, and then solve the problem in time.
                

本身這種內窺鏡在檢測的過程當中，對于環境的要求不是特別的高，只需要保證檢測的周圍沒有強電磁干擾，或者是劇烈的電壓波動，不然的話，都會對于檢測的設備造成非常不良的影響，而對于環境的濕度和溫度來說，也應該適當?shù)娜M足設備的使用的要求，這樣才能夠保證內窺鏡的使用過程當中，不會造成一定的損傷，因?yàn)檫^高的溫度的話，都沒有辦法去讓設備得到一個很好的散熱。

This kind of endoscope itself in the process of detection, the requirements for the environment is not particularly high, just need to ensure that there is no strong electromagnetic interference around the detection, or violent voltage fluctuations, otherwise, it will cause very bad impact on the detection equipment, and for the humidity and temperature of the environment, it should also be appropriate to meet the requirements of the use of the equipment, which is very important Only in this way can we ensure that the use of the endoscope will not cause certain damage, because if the temperature is too high, there is no way to let the equipment get a good heat dissipation.

如果過于明亮的光線的話，會直接降低人眼的分辨力，同時也會影響的監測圖像的一個反差，在一般進行檢測的時候，是不允許在一些強烈的光線下，比如說一些日光直射的情況下進行，所以應該選擇一些光線比較柔和，然后比較安靜的室內環境，因?yàn)橹挥羞@樣在使用內窺鏡的時候，才能夠帶來一個很好的效果，內窺鏡本身就作為一種無損檢測工具，所以已經能夠廣泛的運用到各大領域當中，包括在一些火力發電廠，或者是一些核電站當中的一些旋輪機，或者是發電機當中，都能夠帶來一個很好的使用，再進行相關檢查的時候，也更好的去方便了一些工作人員。

If the light is too bright, it will directly reduce the resolution of the human eye, and also affect the contrast of the monitoring image. In general, it is not allowed to detect in some strong light, such as direct sunlight, so we should choose some indoor environment with softer light, and then quieter, because this is the only way to detect in the room When using the endoscope, it can bring a good effect. As a nondestructive testing tool, the endoscope itself has been widely used in various fields, including some thermal power plants, some nuclear power plants, some turbines, or generators, which can bring a good use, and then carry out the relevant inspection At the same time, it is also better to facilitate some staff.