內窺鏡設備不斷應用在醫療行業中,發揮著很大的作用,但不可避免在使用過程中會出現一些故障,比如說常見的一個故障--設備噴嘴堵塞。那么要怎么處理呢?
Endoscope equipment is constantly used in the medical industry, playing a great role, but inevitably there will be some failures in the use of the process, such as a common fault - equipment nozzle blockage. So how do you deal with it?
噴嘴堵塞原因
Reason for nozzle blockage
1、吸頭不慎與硬物碰撞→吸嘴變形→吸嘴堵塞(內窺鏡保養不當是堵塞的主要原因)。
1, the suction head accidentally collision with hard objects, suction nozzle deformation, suction nozzle blockage (endoscope maintenance is the main reason for blockage).
2、內窺鏡使用后未立即清洗→臟物在噴嘴內凝固→噴嘴堵塞。
2. The endoscope is not cleaned immediately after use → the dirt is solidified in the nozzle → the nozzle is blocked.
3、消毒前內窺鏡未用清潔劑徹底清洗→消毒劑使蛋白質凝固→噴嘴堵塞。
3. The endoscope was not thoroughly cleaned with detergent before disinfection → the protein was solidified by disinfectant → the nozzle was blocked.
4、擦鏡方向錯誤→棉紗塞入噴嘴→噴嘴堵塞。
4. The direction of the mirror is wrong → the cotton yarn is plugged into the nozzle → the nozzle is blocked.
5、噴頭堵塞后用針挑起或自行取下噴頭→噴頭損壞或內管堵塞可能性大→噴頭堵住。
5, after the nozzle is blocked, use a needle to stir up or remove the nozzle by yourself → the nozzle is damaged or the inner pipe is blocked → the nozzle is blocked.
6、清洗消毒時使用有問題的清洗配件→污物隨灌洗液送入內窺鏡→噴嘴堵塞。
6. Use problematic cleaning accessories when cleaning and disinfection → dirt is sent into endoscope with lavage liquid → nozzle blockage.
噴嘴堵塞處理:
Nozzle blockage treatment:
1, endoscope equipment maintenance process first to deal with endoscope, need to be more careful.
2、內窺鏡使用后應立即清洗。
2. The endoscope should be cleaned immediately after use.
3、內窺鏡消毒前必須徹底清洗。
3, the endoscope must be thoroughly cleaned before disinfection.
4、擦鏡子時要順著噴嘴的方向。
4, wipe the mirror along the direction of the nozzle
5.噴嘴堵塞時,請勿用針挑或自行取下噴嘴。
5. When the nozzle is blocked, do not pick it with a needle or remove it by yourself.
6、清洗內窺鏡前,應徹底檢查清洗附件是否有缺陷。
6. Before cleaning the endoscope, thoroughly check whether the cleaning accessories are defective.
In the face of nozzle blockage of endoscope equipment, do not deal with it at will, but find the right way. If the fault cannot be eliminated, professional maintenance personnel are required to repair it. Do not disassemble the equipment by yourself. More web site, http://m.thefunfoodfactory.com, please advice.